When you circumvent the skin barrier with something like DMSO....you run the risk of getting TOO MUCH of the magnesium into your body. I wouldn't begin to know how you could make this without proper measurement of the magnesium flakes and water, to get a safe concentration to mix with the DMSO.

The skin is a very effective barrier to avoid toxins and poisoning.
Epsom salts baths need time to work, and even then the amount of mag that gets in is still quite small.

Any contaminant in the magnesium you use to make the solution will also go into the body with the DMSO. And there will certainly be other substances in that product you are using. Food grade is not 100% pure....it is just cleaner than non food grade.

Just a quick look around Google, and the flakes are not cheap either. My magnesium lotion lasts me MONTHS...about 3 months a bottle. This is because you only apply a small amount...the lotion carries it right thru the skin barrier.

Sometimes do it yourself products may backfire on you!

Well I've used DMSO for about 20 years now for various things and it didn't kill me yet. But I'll take your advice and not do that. But if it sits on your legs all day won't it get in to some extent like the Epsom salts? And it's not expensive where I got it on Amazon. I can make enough for a year I'll bet on this jar which was less than $15.

Of course if it doesn't work that's a moot point. However then hundreds of reviews on amazon are dead wrong.

Do what you want.... I am only pointing out what may happen to you.

I personally would not use DMSO, myself.

Well that's a given. I always do what I want. I like to do research first however and that's what I'm doing.

I was listening to you and heed your warnings. However that doesn't mean you are correct about this. But you are generally reliable so I'll do further research.

I totally agree with this and have seen this time and time again. The 100% pure on the label is likely not accurate. When an analysis is performed on a non-drug product like this, it is very minimal and generally performed with instruments that aren't sensitive enough to truly see the related substances, excipients or impurities.

These flakes are likely manufactured by some type of heating/evaporating/cooling process. This is one of the places where impurities find their way into the product.

If I were considering this product, I would probably call the company and ask them to provide me a Certificate of Analysis. If they are a good company and doing things above board, they should be able to provide this C of A easily and match it to the batch on your product. I'd want to know both the purity and potency before I made a solution of this.

Just my 2 cents....

I looked up these flakes, and sure enough...they come from evaporated Dead Sea electrolytes. That means many potential things you don't want going thru your skin, may be in them.
Some of the makers clearly state, they do not have certification for oral use.

I dig the Morton's cream. Sure, there are times where it isn't enough, but I am betting nothing would do the job at those times. Well, maybe something, but nothing in my current arsenal.

I know a lot of folks who make their own mag oil. I've used it a lot over the years, never made my own...tends to irritate some areas of my skin. I use DMSO for many years and dilute the 99% solution about 70/30 with distilled water. Helps ease my joint pain. I'm a member of a yahoo DMSO group and everyone is fine on DMSO. I'm trying a bottle of Mortons on my next Amazon order. Later all.

Since I'm taping my knee and ankle, I don't use the topicals I used so much now. Gotta buy more tape thou.

How does taping help?

Primarily, stability of joints. I sleep with taping and can walk much better in the morning after a night's sleep. You can find a lot of info on taping on the net. Many PT's and chiro's use it. And many learn how to use it on their own, videos, instructions, youtubes online.